- EOGas™ series 3plus - free-standing and table-top sterilisers
- Anprolene® - table-top sterilisers
EO GAS™ SERIES 3-PLUS STERILISERS
Is your product small or made in batches which are uneconomic for large
sterilizers?
The EOGAS™ systems will offer you a real benefit if you have small batches
of product to sterilise which do not fit into the processing systems of contract
sterilizers.
Do you want to minimise handling of product and transport costs?
If you want to retain control over your production, using these systems you
will always know where your product is.
Do you have hospital returns which need decontaminating?
The EOGAS™ system not only offers a completely safe and reliable method
of decontamination it can be use as a convenient way of testing how development
products are effected by sterilisation.
Product Benefits
- Very low gas consumption
- Uses 1/5th the amount of EO of closest competitor
- Cartridges and sterilisation bags match load volume rather than chamber size
- Multi-load capacity - EO is introduced directly into the packages, allowing
the operator to load new bags and unload finished bags while other are being processed
- Easy installation - no water or vacuum source required
Key Features
- 100% ethylene oxide used in processing (no CFCs)
- Sterilises and aerates in one cabinet
- Power outage protection
- Process display and logging
- Typical cycle time: 16 hours
- Complies with personnel exposure regulations, catalytic converter available
to fully scrub exhaust
- Bag containment system allows concurrent processing of several batches
- 3 sizes available:
- Table-top cabinet 168 litres
- Free-standing cabinet 280 litres
- High capacity free-standing cabinet 922 litres
- Easy to use
Specifications
Top of page
ANPROLENE® - TABLE TOP STERILISERS
The new Anprolene® AN 74i version is a much improved upgrade of the original
AN74 model and is ideal when cost or space are limited or when load volumes do
not require a large steriliser.
Product Benefits
- Simple installation
- Very economical to run
- Automatic sterilisation and purge cycle
- Improved purging of sterilization bag
- Replacement of ventilation alarm with
- back pressure monitor
- Sturdy steel cabinet
- Easy maintenance
SPECIFICATIONS
|
AN74i |
AN74ix |
| Interior dimensions (LxWxH): |
19.5" x 13.75" x 12.75" |
29.13" x 12.75" x 13.63" |
| Exterior dimensions (LxWxH): |
21" x 14" x 20.5" |
31.5" x 13.87" x 20" |
| Total weight: |
46 lbs |
83 lbs |
| Power supply: |
115v +/-10%, 60Hz/150Watts |
115v +/-10%, 60Hz/150Watts |
| Installation category: |
Cat. II |
Cat. II |
| Certification: |
Both are CE marked and CSA tested for electrical
safety |
Technical Information
All mechanical and electrical components are located within the top section
of the sterilizer removing the separate ventilation box. The exhaust of the gas
is via a 3/8" flexible PVC tube which can be extended to 100 feet via four
90 degree turns. The tube can be run through existing exhaust ducting or exit
via a window, removing the need for extensive building works
.
Pumps
The dual pump system can evacuate the sterilizer chamber at 38 litres / minute
via a newly designed purge tube giving a much improved air wash.
Back Pressure Monitor
The original ventilation alarm has been replaced with a monitor to give a reading
on the backpressure. A high constant reading indicates that the exhaust system
may be compromised.
EO Consumption
The Anprolene systems use only 17.5 grams of EO per cycle.
Monitoring of Sterilisation
The efficacy of each sterilisation cycle can be demonstrated using biological
indicators. Process indicators may also be used to control inventory and indicate
whether or not the product or pack has gone through sterilisation. Both types
of
indicators are available from MET.
Refill Kits
Each Refill Kit includes:
- Sterilising gas ampoules: 15, 735 or 920 cc
- Liner bags: capacity 7L or 35L
- Twist seal closures
Top of page
